Sper-scientific 850055 pH Meter - Advanced Manuel d'utilisateur télécharger pdf (Page 14)

SETUP MODE

3. Press MN/MX/AV to enter P4.1. The default “NIS”

(NIST) will flash on the LCD and P4.1 will appear on the

lower portion of the display. If you use NIST buffers,

press MN/MX/AV to confirm and the meter returns to

P4.0.

4. If your requirement is not for NIST buffers, press ▲ to

change the status to CUSTOM buffer.

5. Press MN/MX/AV to confirm and the meter will return to

P4.0.

P5.0 Ready Icon

This feature enables/disables the “READY” icon, which

indicates that the measured reading is stable.

1. Press SET for 2 seconds to enter setup.

2. Press ▲ to select “READY” on the display.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Pas de commentaire

Sper-scientific 850055 pH Meter - Advanced Manuel d'utilisateur Page 14